FIREDEPARTMENTSIGNS.NYC
FIRE EXTINGUISHER INSIDE SIGN (ALUMINUM SIGNS 3X8) WHITE
- Availability:
- IN STOCK
Description
"FIRE EXTINGUISHER INSIDE" SIGN (SIZE 3'' X 8'')
Size: 3 Inch x 8 Inch
Sign has mounting holes in each corner.
Round Corner
Sign Thickness 0.02''
Sign letters Color: White
Sign background color: White
Sign material: Aluminium
Sign Type: Wall Mounted
HPD Required sign: NO (See Law and regulations)
DOB NYC Required sign: NO (See Law and regulations- for more detail)
Fire Department required sign: YES (See Law and regulations- for more detail)
Required signs for restaurant and bars- N/A (See Law and regulations)
DOT Required Sign: NO (See Law and regulations)
DSNY Required Sign: NO (See Law and regulations)
SKU: MDL NYC HMC NYC FD3-8x17210
UPC: 745528293298
Sign Group: Property Management Signs, DOB Signs, Fire Department Signs, Fire Extinguisher Signs, Safety Signs, Equipment Signs, Extinguisher Identification Signs, Building Directional Signs, White Background Signs
DISCLAIMER to comply with the New York City Consumer Protection Law which applies to all businesses operating in New York City: HPD-signs.com is a small family-owned and family-operated Brooklyn-based business. HPD-signs.com is not a City of New York store nor are the website, products or services affiliated with the City of New York or any agency of the City of New York. HPD-signs.com itself, its business, website, products, services, or any hyperlinks from its website are not sponsored by, approved by, affiliated with, endorsed by, or connected to the City of New York or any agency of the City of New York, including but not limited to HPD, DOB, DOT, DSNY, FDNY directly or by implication
This is a sturdy EXTINGUISHER FIRE DEPARTMENT SIGN - WHITE BACKGROUND WITH DARK RED LETTERS (MATERIAL IS STURDY ALUMINUM; size is 3'' x 8'') WITH ONE HOLE IN EACH CORNER. The thickness of the sign is 0.02''. This FIRE EXTINGUISHER sign is required by the Fire Department and is made from a type of ALUMINUM, which is exceptionally sturdy. The sign is for both indoor and outdoor use.
Install a FIRE EXTINGUISHER INSIDE sign to stay compliant with the relevant laws, regulations and recommendations in force in NYC. Maintain the safety levels required by different federal and municipal agencies and institutions that observe and enforce the law.
Our FIRE EXTINGUISHER INSIDE signage comes with four pre- drill holes, which allow you to either use screws and install sign on walls behind relevant equipment or use Jack Chain/Sturdy Wire and install sign on the equipment it refers to, in which case you can simply hang sign where it belongs.
This is an aluminum “FIRE EXTINGUISHER INSIDE” sign with WHITE BACKGROUND,RED LETTERS,size 3x8 & 4 drill holes for heavy duty installation.Post sign to locate/tag/label EXTINGUISHER & inform tenants/owner/officers/Fire Department Crew of its location
The Fire extinguisher signs are designed to inform guests and 1st respondents of the location of the fire extinguisher in the building or facility at hand. A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. Many states and municipalities such as NYC, dob hpd and others require building owners to equip compliant facilities with fire extinguishers and post clear signage regarding the location of the fire extinguishers at hand.
Frequently asked questions:
What are fire extinguishers used for? Fire extinguishers are portable or movable apparatuses used to put out small fires by directing onto them substances that cool the burning material, deprive the flame of oxygen, or interfere with the chemical reactions occurring in the flame.
How do fire extinguishers work? Water extinguishers work by removing heat from the fire. Dry chemical extinguishers are tanks of foam or dry powder with compressed nitrogen as the propellant. They work by smothering the fire: when you put a layer of powder or foam on the fire, you cut the fuel off from the oxygen around it, and the fire goes out.
What is a fire extinguisher made of? Most of the elements of a fire extinguisher are made of metal. The pressure vessel is generally made of an aluminum alloy, while the valve can either be steel or plastic. Other components, such as the actuating handle, safety pins, and mounting bracket, are typically made of steel.
When should you use fire extinguishers? You should only consider using a fire extinguisher if all members of your home have been alerted of the fire at hand. Make sure you are safe from smoke and that the fire is not between you and your only escape route
Do we need fire extinguishers in our room/building/apartment/unit/facility? Regulations state that a minimum of two Class A fire extinguishers on every floor of a building are needed, unless the premises are very small, in which case one may be acceptable.
What is refilling of fire extinguishers? The refilling or recharging process of a fire extinguisher involves refilling it with the fire extinguishing agent it uses. In some cases refilling also means emptying the remaining agent and filling it again.
Shipping and Handling Cost:
Our Shipping is fixed whether you buy 1 item or 20 items (We ship within USA only) - do not miss this opportunity to buy all signs needed at no additional shipping cost.
Sales Tax:
We are required to collect sales tax on any product sold on this site and shipped to an address in New York. The sales tax is 8.875 percent.
The requirements for sign content are determined by intended use and by applicable regulation. The BUYER is responsible for determining the appropriate content for a sign or package of signs. HPD-Signs.com makes no warranty or representation of suitability of a sign for any specific application. IT IS THE CUSTOMER'S RESPONSIBILITY TO ENSURE THAT THE SIGNS THE CUSTOMER ORDERS ARE IN COMPLIANCE WITH ALL STATE, FEDERAL, LOCAL, AND MUNICIPAL LAWS. Please review terms and conditions prior to purchase.
For more information about what is required, see the laws that are referenced and the rules applicable to your city and state. This page is for informational purposes only and is not intended as legal advice, professional advice or a statement of law. You may wish to consult with an attorney.
At HPD-signs we specialize with all NYC Department of Building signage (DOB), NYC Housing Preservation and Development signage (HPD) and NYC Department of Transportation signage (DOT). Our objective is to provide property managers, construction site operators and building owners with signs required by NYC agencies and NYC Fire Department, aluminum signs, warnings and notices for quick and heavy duty installation, required building signs, aluminum signs to install in buildings with proper HPD designation, as well as FIRE EXTINGUISHER INSIDE SIGNS
This is an aluminum “FIRE EXTINGUISHER INSIDE” SIGN with holes for HEAVY DUTY installation. In NYC use/post sign to inform tenants/owners/guests/officers of FIRE EXTINGUISHER in facility with proper HPD designation and aluminum signs